Izdelki za stojalo za koleso (13)

ABES Range-vélo 452 est un système modulaire de supports vélos pour le raccordement en rangée. Deux resp. trois étiers en tube d’acier cintrés en arceau avec un diamètre de 42,4 mm × 2,5 mm, chevillés sur deux barres plates, qui offrent la possibilité de se raccorder en rangée. Trous pour boulons d’ancrage fournis. Montage À visser (+/- 0 mm). Finition – Acier inoxydable 1.4301 poli en grain 240. En option : électro-polissage/haute brillance. – Acier galvanisé S235 avec revêtement par poudre en coloris RAL standard ou DB 703. – Autres couleurs disponibles contre supplément de prix. – Dimensions de tube, hauteurs et largeurs autres que celles spécifiées sont possibles sur demande et moyennant un supplément. – En option avec barre de genou. Des systèmes de rangée de plus grande peuvent être réalisés avec des « Plaques adaptateurs pour le raccordement en rangée« . Pose:à visser au sol Matériau:en acier galvanisé,en acier inoxydable Marché:pour espace public

The Protector has been developed to ensure the safe removal of bolt seals. It prevents fragments from flying off, potentially endangering personnel and equipement. After cutting, both parts of the seal remain securely attached to the Protector clamps for visual inspection or removal. Damages due to sharp seal parts (like puncturing tyres) will be avoided. A magnet holds the device with the broken bolt parts during the cutting process. Applications: Safe removal of bolt seals with bolt cutters on containers, truck doors ... Technical specification: Alligator clips of galvanized steel, plastic coated, spring loaded Magnet with 20mm diameter, 100N holding force Cable made of Polypropylen, 500-5.0 mm, black/yellow Packaging: 1 set per box 19x14x6 cm; 0.2 kg

ABES Bicycle Stand 450-1 rack row system is a configuration of two or three adjacent bars made of bent steel tube with tube diameter of 42.4 × 2.5 mm, a vertical rear tube run, and with staggered tube ends. Each bar is welded at an angle of 90° (45° on request) to the curved base plate which can be assembled in rows at both ends. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Larger rack row systems can be realized with “Adapter plate for row connection“. Installation:floor-mounted Material:steel, stainless steel Market:for public spaces

ABES Range-vélo 450-1 (multiple) est un système modulaire de supports vélos pour le raccordement en rangée. Deux ou trois supports adjacents en tube d’acier cintré avec un diamètre de 42,4 × 2,5 mm, un tube arrière vertical et des extrémités de tubes décalées. Chaque support est soudé à un angle de 90° (45° sur demande) à la base cintrée, qui offre à ses deux extrémités la possibilité d’un raccordement en rangée. Montage À visser (+/- 0 mm). Finition – Acier inoxydable 1.4301 poli en grain 240. En option : électro-polissage/haute brillance. – Acier galvanisé S235 avec revêtement par poudre en coloris RAL standard ou DB 703. – Autres couleurs disponibles contre supplément de prix. Des systèmes de rangée de plus grande peuvent être réalisés avec des « Plaques adaptateurs pour le raccordement en rangée« . Pose:au sol Matériau:en acier, en acier inoxydable Marché:pour espace public

ABES Bicycle-Stand 472 is a bike rail with knee rail and rounded edges made from 80 x 10 mm bent flat steel. Additional material thicknesses, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Bicycle-Stand 472 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 80 x 10 mm – Height above ground: 850 mm – Full height: 1100 mm – Width: 800 mm Installation:Fixed mounted, screw fixing Material:steel, stainless steel Market:for public spaces

ABES Bicycle Stand 452 is a modular rack row system consisting of two or three U-rack steel tube racks with a tube diameter of 42.4 mm × 2.5 mm, bolted onto two flat bars which can be assembled in rows. Holes for ground anchor bolts provided. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. – Tube dimensions, heights and widths other than specified are available on request and at an additional cost. – Optionally with knee rail. Larger rack row systems can be realized with “Adapter plates for row connection“. Installation:free standing or screw fixed Material:steel, stainless steel Market:for public spaces

ABES Bicycle-Stand 471 is a bike rail with rounded edges made from 60 x 12 mm flat steel. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Option: removable with ground shells Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 471 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 60 x 12 mm – Height above ground: 800 mm – Full height: 1150 mm – Width: 800 mm Installation:Fixed mounted, screw fixing, removable with ground shells Material:steel, stainless steel Market:for public spaces

U-rack made from perpendicular steel profiles with an integrated LED bar unterneath the crossbar. Other dimensions are available upon request. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. Overview: Bicycle Stand, stainless steel, galvanised steel or powder coated – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm – LED-bar (approx. 24,5 x 770 mm) – Power supply: 24 V DC – Power input: approx. 6,7 W – Luminous flux: approx. 560 lm – Reflected beam angle: 120° – Light colour: 4000 K – Light transmission: CRI >80 – Protection type: IP 67 – Connection cable: approx. 1 m with IP 67 plug The Connection, including all technical requirements, is delivered by the client and is not included in this package. Mounting:Fixed mounted, screw fixing, removable with ground shells Material:steel, stainless steel Options and accessories:integrated LED Market:for public spaces

ABES Bicycle-Stand 450-1 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 845 x 683 x 244. – Optional: convex cover plate with a 300 mm diameter. Installation:fixed mounted, removable with ground shell as an option Material:steel, stainless steel Design:modern Market:for public spaces

ABES Anlehnbügel 452 ist eine modulare Fahrradparker-Reihenanlage mit zwei bzw. drei U-förmig gebogenen Stahlrohr-Bügeln mit einem Rohrdurchmesser von 42,4 mm × 2,5 mm, verschraubt auf zwei Flacheisen, die über die Möglichkeit zur Reihenverbindung verfügen. Bohrungen für Bodenankerschrauben vorgesehen. Befestigung Zum Aufschrauben bei +/- 0 mm. Ausführung – Edelstahl 1.4301, auf Korn 240 geschliffen. Optional: elektropoliert. – Stahl S235, feuerverzinkt, alternativ zusätzlich mit Pulverbeschichtung in Standard-RAL-Farben oder DB 703. – Andere Farben auf Wunsch gegen Aufpreis erhältlich. – Auf Wunsch und gegen Aufpreis sind andere Rohrabmessungen, Höhen und Breiten als angegeben möglich. – Optional mit Querholm. Reihenanlagen mit mehr Anlehnbügel können durch die Verkettung meherer 2er- bzw. 3er- Züge und unter Verwendung von Adapterplatten zur Reihenverbindung realisiert werden. Anbringung:zum freien Aufstellen oder Aufdübeln Material:Stahl, Edelstahl Absatzmarkt:für öffentliche Bereiche

ABES Bicycle-Stand 453 is a U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge. An assembly model is available. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Bicycle-Stand 453 overview: – Rectangular tube 50 x 20 mm – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm Installation:Fixed mounted, screw fixing, removable with ground shells Material:steel, stainless steel Market:for public spaces

ABES Bicycle-Stand 451 is a frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish · Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. · Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. · Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. ABES Bicycle-Stand 451 overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 855 x 340 x 290 – Optional: convex cover plate with a 300 mm diameter Installation:Fixed mounted, removable with ground shells Material:steel, stainless steel Market:for public spaces

ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter Installation:Fixed mounted, removable with ground shells Material:steel, stainless steel Options and accessories:modern design Market:for public spaces